Department Calendar of Events

Apr
13
Wed
LLE: Nanoplastics in Our Environment: Small Particles with Big Challenges (Nathalie Tufenkji, McGill) @ Zoom
Apr 13 @ 12:00 pm – 1:00 pm

External members are required to register to receive the link and passcode. Registration closed at 9am on April 11.

Co-hosted with the Institute for Water Innovation (IWI)

Nathalie Tufenkji, McGill

Host: Prof. Jay Werber

The degradation of bulk plastics in the environment leads to the release of microplastics that can contaminate water supplies, agricultural fields, and foods we consume. Weathering of a single microplastic particle can yield up to billions of nanoplastics and nanoplastic pollution is expected to be ubiquitous in the environment. Nanoplastics are potentially more hazardous than microplastics because they can cross biological membranes; yet, there is little data on the occurrence, fate and impacts of nanoplastics. A key challenge in understanding the environmental burden of nanoplastics is the detection of such small, carbon-based particles in complex natural matrices such as soils.

Environmental nanoplastics are often thought of as an extension of microplastics with a distinction based on an arbitrary size cut-off, typically 100 nm or 1000 nm. In our view, in terms of environmental implications and analytical challenges, a size cut-off distinction provides little guidance. While a consensus on the precise definition of “nanoplastic” has yet to be reached, we advocate for a characteristic-based distinction between nanoplastics and microplastics. Based on existing literature and analytical methods, we present a set of characteristics, distinct from microplastics and other contaminants, that define environmental nanoplastics.

This lecture will present an overview of our work aimed at overcoming challenges to better understand the fate and impacts of nanoplastics in terrestrial and aquatic environments. I will discuss new approaches for detection of nanoplastics in complex matrices and recent advances in our understanding of the toxicity of nanoplastics.

_____________________________________

Nathalie Tufenkji is a Professor in the Department of Chemical Engineering at McGill University where she holds the Tier I Canada Research Chair in Biocolloids and Surfaces. She works in the area of particle-surface interactions with applications in protection of water resources, plastic pollution as well as the discovery of natural antimicrobials. Professor Tufenkji was awarded the Killam Research Fellowship, the Engineers Canada Award for the Support of Women in the Engineering Profession, the Chemical Institute of Canada Environment Award, an Early Career Research Excellence Award by the Faculty of Engineering at McGill University, the YWCA Woman of Distinction Award in Science and Technology, and the Hatch Innovation Award of the Canadian Society for Chemical Engineers. She was elected to the College of New Scholars, Artists and Scientists of the Royal Society of Canada in 2016 and the Canadian Academy of Engineering in 2020. Beyond her research and teaching roles, Professor Tufenkji also serves as Associate Director of the Brace Center for Water Resources Management at McGill and has co-chaired several major international conferences. She has also served on the editorial advisory boards of the journals Environmental Science and Technology, npj Clean Water, Water Research, Colloids and Surfaces B, Advances in Colloid and Interface Science, and Environmental Science: Nano.

 

View the complete 2021-22 LLE schedule

Questions? Please contact Delicia Ansalem, Communications Officer & External Relations Liaison delicia.ansalem@utoronto.ca

May
27
Fri
5th ChemE Exhibition & 36th Dinner
May 27 @ 4:00 pm – 9:30 pm

SAVE THE DATE! The 5th ChemE Exhibition & 36th Dinner will be held at the Delta Chelsea Hotel located at 33 Gerrard St W. Invitations have been sent to faculty, staff, students, alumni, and industry partners. If you have questions regarding how to register, please email jennifer.hsu@utoronto.ca.

Jun
14
Tue
BioZone Workshop Series: Bioinformatic Analysis of 16S rRNA Amplicon Sequencing Data
Jun 14 @ 3:30 pm – Jun 23 @ 5:00 pm

CREATE for BioZone will host a free hands-on Bioinformatic Analysis Workshop Series on June 14, 16, 21 and 23. The four-day workshop, featuring instructors Dr. Courtney Toth and Dr. Camilla Nesbø, will provide an overview of the tools and techniques used in the bioinformatic analysis of 16S rRNA amplicon sequencing data. Please mark your calendar and register by June 10.

Day 1 (June 14, 3:30-5:00pm ET)
Basic principles of amplicon sequencing.
Introduction to command line for bioinformatics.

Day 2 (June 16, 3:30-5:00pm ET)
Running QIIME 2, a bioinformatics platform for processing microbial sequencing data.
A practice dataset will be provided.

Day 3 (June 21, 3:30-5:00pm ET)
Running PhyloSeq, a bioinformatics platform for analysis and graphical display of microbial sequencing data.

Day 4 (June 23, 3:30-5:00pm ET)
Q&A
BioZone choice: What bioinformatics tools and/or graphical displays would you like to learn more about?

Cost: Free
Venue: In-person and virtual (Teams)
Register by June 10: https://uoft.me/bioinfanalysisworkshop

All BioZone members including students, postdocs, staff and principal investigators interested in learning how to do bioinformatic analysis of sequencing data are encouraged to attend. We look forward to your participation!

Questions? Email us at:
courtney.toth@utoronto.ca or camilla.nesbo@utoronto.ca

Jun
16
Thu
2022 ChemE Spring Convocation
Jun 16 @ 2:30 pm – 4:30 pm

Graduating students, faculty, and staff are invited to ChemE’s Spring Convocation Reception from 11AM to 1:30PM at the Faculty Club. Registration details have been sent through email. If you have questions, please email jennifer.hsu@utoronto.ca.

Our Spring Convocation Ceremony will run from 2:30PM to 4PM. Please visit https://governingcouncil.utoronto.ca/convocation for more information.

Aug
25
Thu
Special Seminar: User-Programmable Hydrogel Biomaterials to Probe and Direct 4D Stem Cell Fate @ Red Seminar Room, Donnelly Centre
Aug 25 @ 11:30 am – 12:30 pm

Abstract:

The extracellular matrix directs stem cell function through a complex choreography of biomacromolecular interactions in a tissue-dependent manner. Far from static, this hierarchical milieu of biochemical and biophysical cues presented within the native cellular niche is both spatially complex and ever changing. As these pericellular reconfigurations are vital for tissue morphogenesis, disease regulation, and healing, in vitro culture platforms that recapitulate such dynamic environmental phenomena would be invaluable for fundamental studies in stem cell biology, as well as in the eventual engineering of functional human tissue. In this talk, I will discuss some of our group’s recent successes in reversibly modifying both the chemical and physical aspects of synthetic cell culture platforms with user-defined spatiotemporal control, regulating cell-biomaterial interactions through user-programmable Boolean logic, and engineering microvascular networks that span nearly all size scales of native human vasculature (including capillaries). Results will highlight our ability to modulate intricate cellular behavior including stem cell differentiation, protein secretion, and cell-cell interactions in 4D.

Biography:

Dr. Cole A. DeForest is the Weyerhaeuser Endowed Associate Professor in the Departments of Chemical Engineering and Bioengineering, the Associate Chair of Chemical Engineering, as well as a core faculty member of the Institute for Stem Cell & Regenerative Medicine at the University of Washington (UW) where he began in 2014. He received his B.S.E. degree from Princeton University in 2006, majoring in Chemical Engineering and minoring in Material Science Engineering and Bioengineering. He earned his Ph.D. degree under the guidance of Dr. Kristi Anseth from the University of Colorado in Chemical and Biological Engineering with an additional certificate in Molecular Biophysics. His postdoctoral research was performed with Dr. David Tirrell in the Divisions of Chemistry and Chemical Engineering at the California Institute of Technology. He has published >60 peer-reviewed articles, including as the corresponding author for those appearing in Nature Materials, Nature Chemistry, Advanced Materials, JACS, PNAS, Science Advances, and Nature Reviews Materials. Dr. DeForest has received numerous research awards and honors including the Society for Biomaterials Young Investigator Award (2020), NIH Maximizing Investigators’ Research Award (MIRA R35, 2020), Safeway Early Career Award (2018), NSF CAREER Award (2017), AIChE 35-Under-35 Award (2017), ACS PMSE Young Investigator Award (2017), Jaconette L. Tietze Young Scientist Award (2015), Biomedical Engineering Society Student Fellow Award (2013), DSM Polymer Technology Award (2011), ACS Excellence in Graduate Polymer Research Award (2010), MRS Graduate Student Research Gold Award (2009), Society for Biomaterials Outstanding Achievement Award (2009), Princeton University Material Science Student of the Year (2006), Princeton University Most Approachable Resident Adviser (2005), and Boulder High School Valedictorian (2002). Notably, he has also been recognized for excellence in teaching and was awarded the UW Presidential Distinguished Teaching Award (2016), given annually to a single Assistant Professor across all of the UW. His research has been supported through fellowships and grants from the National Science Foundation, the National Institutes of Health, and the US Department of Education.

Please contact adminshoichet@utoronto.ca for the Zoom information.

Sep
15
Thu
BZ Seminar: Teaching E. coli to fix CO2
Sep 15 @ 10:00 am – 11:00 am

The living world is largely divided into autotrophs that convert CO2 into biomass and heterotrophs that consume organic compounds. In spite of wide-spread interest in renewable energy storage and more sustainable food production, the engineering of industrially relevant heterotrophic model organisms to use CO2 as their sole carbon source has so far remained an outstanding challenge. I will describe the achievement of this transformation on laboratory timescales with the help of rational design making use of constraint-based modeling. We constructed and evolved Escherichia coli to produce all its biomass carbon from CO2. Reducing power and energy, but not carbon, are supplied via the one-carbon molecule formate, which can be produced electrochemically. Rubisco and phosphoribulokinase were co-expressed with formate dehydrogenase to enable CO2 fixation and reduction via the Calvin-Benson-Bassham cycle. Autotrophic growth was achieved following several months of continuous laboratory evolution in a chemostat under intensifying organic carbon limitation and confirmed via isotopic labeling.

Professor Ron Milo earned a BSc in Physics and Mathematics at the Hebrew University of Jerusalem and a PhD in Biological Physics at the Weizmann Institute of Science. He was the first fellow in Systems Biology at Harvard Medical School before joining the Department of Plant & Environmental Sciences at the Weizmann Institute.

Please contact Vinthiya Param at vinthiya.param@utoronto.ca for log in details.

Oct
5
Wed
LLE: Engineering Human Organoids, Organs, and Societies (Kelly Stevens, University of Washington) @ Virtual
Oct 5 @ 12:00 pm – 1:00 pm

ChemE community, the Zoom link and passcode were shared through email. External members are required to register. Registration closed at 9am on Monday, October 3.

Kelly Stevens, University of Washington

Host: Prof. Alison McGuigan

Although much progress has been made in building engineered human tissues and organs over the past several decades, replicating complex tissues remains an enormous challenge. To overcome this challenge, our field first needs to create better three-dimensional spatial maps, or “blueprints” of human tissues and organs. We also need to then understand how these spatial blueprints encode positional processes in tissues. Here, I will describe some of our work to develop multimodal “google maps” of human organs, as well as both biological and technological means to build these organs. Finally, I will speak to how we might together better built a more impactful profession by leveraging the power of all human intellect.

_____

Dr. Kelly Stevens is an Assistant Professor of Bioengineering, and Laboratory Medicine & Pathology at the University of Washington. Dr. Stevens’ research team focuses on human organ design. Her team is developing molecular blueprints of human organs, as well as new methods to build engineered organs, as through 3D printing and synthetic morphogenesis. Dr. Stevens also works to disseminate the message that to develop advances that equitably improve the lives of all people, our profession needs to include all people. Dr. Stevens has received numerous honors and awards as a result of her work, including Elected Co-Chair of the National Academies of Science, Engineering, and Medicine New Voices Cohort, AIMBE Fellow, Allen Distinguished Investigator Award, NIH New Innovator Award, BMES CMBE Rising Star Award, John Tietze Stem Cell Scientist Award, Keck Foundation Award, and Gree Scholar Award.

 

View the complete 2022-23 LLE schedule

Questions? Please contact Jennifer Hsu, Manager, External Relations (jennifer.hsu@utoronto.ca)

Oct
12
Wed
LLE: Innovation in Sustainable Nanomaterials for Advanced Engineering Applications (Michael Tam, University of Waterloo) @ WB116
Oct 12 @ 12:00 pm – 1:00 pm

Michael Tam, University of Waterloo

Host: Prof. Ning Yan

 

Nanotechnology is anticipated to be the next technological wave that will drive many of the innovations in science and engineering. In this discipline, there is a renewed impetus to develop nanomaterials from renewable sources due to the negative impact of using raw materials from traditional carbon sources, such as crude oil. New opportunities in the use of sustainable and renewable materials for various advanced engineering applications exist, and cellulose nanocrystals (CNC) offer a new route to product development and formulations in many industrial sectors. Various functionalization strategies on the surface of CNC, such as with amphiphilic polymers, inorganic and metallic nanoparticles are being developed and exploited. The talk will focus on the strategies of CNC functionalization in imparting attractive properties critical for their applications. I will illustrate several innovations derived from the transformation of sustainable nanomaterials into platforms that address some of the market requirements and challenges. Some examples of the applications include wastewater treatment, anti-microbial system, conductive inks & fillers, agriculture, and water harvesting.

_____

Professor Michael Tam obtained his B.Eng. and Ph.D. degrees in Chemical Engineering from Monash University, Australia in 1982 and 1991 respectively. He spent 18 months on a postdoctoral fellowship at the Department of Chemical Engineering, McMaster University Canada, and subsequently taught at Nanyang Technological University, Singapore for 15 years. In June 2007 he joined the Department of Chemical Engineering, University of Waterloo as a tenured full professor, and holds the position of University Research Chair in the field of functional colloids and sustainable nanomaterials. He is an active member of the Waterloo Institute for Nanotechnology. His research interests are in colloids, self-assembly systems, polymer-surfactant interactions, and drug delivery systems. He has published more than 350 journal articles in various fields of polymer science and engineering. His total citation exceeds 22,700 and his H-index is 77. He is also an associate editor of ACS Sustainable Chemistry & Engineering.

 

View the complete 2022-23 LLE schedule

Questions? Please contact Jennifer Hsu, Manager, External Relations (jennifer.hsu@utoronto.ca)

Oct
19
Wed
LLE: Understanding Molecular Crystals from First Principles (Leeor Kronik, Weizmann Institute of Science) @ Virtual
Oct 19 @ 12:00 pm – 1:00 pm

External registration closed at 9am on October 17. 

Leeor Kronik, Weizmann Institute of Science

Host: Prof. Tim Bender

Molecular crystals are crystalline solids composed of molecules bound together by relatively weak intermolecular interactions, typically consisting of van der Waals interactions and/or hydrogen bonds. These crystals play an important role in many areas of science and engineering, ranging from biology and medicine to electronics and photovoltaics. Therefore, much effort has been dedicated to understanding their structure and properties.

Molecular crystals often feature significant collective effects, i.e., phenomena that the individual units comprising the crystal do not exhibit, but arise through their interaction. Such effects lie beyond the reach of textbook explanations. They therefore require a first principles approach, which relies on nothing but the constituent atomic species and the laws of quantum mechanics.

In this talk, I will demonstrate how first principles calculations are used to explain and even predict collective effects in molecular crystals. Specifically, I will focus on: (1) Unusual structure-function relations in biogenic molecular crystals; (2) Reactivity and stability trends in phthalocyanines (Pc) and subPc molecular crystals; (3) Surprising mechanical properties of amino-acid based bio-inspired molecular crystals; (4) Unexpected magnetic and spintronic behavior in metal-organic crystals. Throughout, I will emphasize insights gained from a successful dialogue between theory and experiment, as well as remaining theoretical challenges.

_____

Leeor Kronik holds the Katzman Professorial Chair and directs the Beck Center for Advanced and Intelligent Materials at the Weizmann Institute of Science, Israel. He obtained his Ph.D. at Tel Aviv University and was a Rothschild and Fulbright post-doctoral fellow at the University of Minnesota. His research interests are in developing density functional theory, with a current emphasis on advanced functionals for electron and optical spectroscopy; And in using density functional theory to understand and predict materials properties, with a current emphasis on organic and hybrid organic–inorganic solids and structures. He is a Fellow of the American Physical Society, and has recently received the Excellence in Research Award of the Israel Vacuum Society (2018), the Kimmel Award for Innovative Investigation (2021), and the Outstanding Scientist Award of the Israel Chemical Society (2021).

 

View the complete 2022-23 LLE schedule

Questions? Please contact Jennifer Hsu, Manager, External Relations (jennifer.hsu@utoronto.ca)

Nov
16
Wed
LLE: From Mitigating Climate Change to Enhancing Access to Safe Water: Unmet Global Challenges and Role of Chemical Engineering (Arup SenGupta, Lehigh University) @ WB116
Nov 16 @ 12:00 pm – 1:00 pm

Co-hosted with the Institute for Water Innovation (IWI)

Arup SenGupta, Lehigh University

Host: Prof. Nikolai De Martini

The elevated atmospheric CO2 concentration resulting from anthropogenic emissions is singularly responsible for global climate change and viewed as the worst existential threat confronting humanity today. Besides replacing fossil fuels with renewable energy and emission control, direct air capture (DAC) of CO2 from the ambient atmosphere has emerged as a potential strategy for achieving net-zero greenhouse gas emissions by 2050 as recommended by the Intergovernmental Panel on Climate Change (IPCC). While the DAC implementation is geographically very flexible, the ultra-dilute atmospheric CO2 concentration (~ 400 ppm) poses a formidable hurdle for high CO2 capture capacity using sorption-desorption processes. At Lehigh University in Pennsylvania, we have developed a hybrid sorbent enabling a high CO2 sorption capacity (> 5.0 moles CO2 per kg sorbent) that is nearly 2-3 times greater than other sorbents reported to date. Upon exhaustion, this sorbent is amenable to efficient regeneration by simple salt solutions at ambient temperature without needing any thermal energy. This study reveals for the first time that sea water has the potential to be used both as a regenerant and a sink for direct air capture of CO2 at ambient temperature.

It is well recognized today that lack of access to quality water drives inequality and perpetuates the cycle of poverty. Although unknown nearly three decades ago, natural arsenic contamination of groundwater has emerged as a major global crisis affecting over fifty countries. The adverse health effects resulting from drinking of arsenic contaminated groundwater are most apparent in South and Southeast Asia in countries like Bangladesh, Cambodia, Nepal, India, Laos and China where over 200 million people, according to World Health Organization (WHO), are severely threatened with arsenic-inflicted health impairment. During the last 20 years, the speaker and his students aided by many international partners are striving to resolve the crisis globally. In many regions, intervention through innovative technology has resulted in economic growth and employment opportunities in affected communities. Speaker’s experience in several countries including India, Cambodia and Bangladesh will be presented.
_______

For well over three decades, Arup K SenGupta’s research has encompassed nearly every aspect of water science and technology: from drinking water treatment to desalination to municipal wastewater reuse to resource recovery. SenGupta is internationally recognized for advancing and expanding the field of ion exchange science and technology, and applying it for development of sustainable technologies and new materials. Currently, SenGupta is actively pursuing direct air capture (DAC) of CO2 from atmosphere to mitigate global climate change. He is the inventor of the first reusable, arsenic-selective hybrid anion exchanger nanomaterial (HAIX-Nano). Over two million people around the globe currently drink arsenic-safe water through use of HAIX-Nano.

For his research and scholarly contributions, SenGupta received many national and international awards including: 2004 International Ion Exchange Award at the university of Cambridge, England; 2007 Grainger Challenge Silver Award (2007) from the National Academy of Engineering (NAE); 2009 Lawrence K Cecil Environmental Award from the American Institute of Chemical Engineers (AIChE); and 2012 Intel Environmental Award for ‘technology benefiting humanity’ to name a few.

 

View the complete 2022-23 LLE schedule

Questions? Please contact Professor Jay Werber (jay.werber@utoronto.ca) or Sophia Lu (soph.lu@mail.utoronto.ca).